Medical Wet Wipes

Medical Wet Wipes

Our ANDRITZ TT parallel-laid equipment arranges fibres along the machine direction. It delivers a balanced MD/CD strength ratio, superior web uniformity and stable running performance for high-speed wet wipe converting. This grade is widely adopted for smooth, plain medical and healthcare wipe substrates.
Send Inquiry
Description
Technical Parameters

Product Grades & Technical Specifications

Product Code Fiber Composition GSM Range Web Structure Surface Finish Recommended Primary Use
SL-V01 100% Viscose 30–100 gsm TT Parallel-Laid Plain General patient care wipes, gentle skincare wipes
SL-VP02 50% Viscose + 50% Polyester 40–120 gsm Semi-Cross-Laid Embossed (Pearl / Dot) Alcohol disinfectant wipes, high wet-strength surface wipes
SL-FSC03 100% FSC-Certified Viscose 35–90 gsm TT Parallel-Laid Plain Eco-friendly healthcare wipes, sustainable retail lines
SL-C04 100% Cellulosic (Wood Pulp + Regenerated Cellulose) 40–110 gsm Semi-Cross-Laid Plain / Embossed Plastic-free wet wipes, dry cleansing wipes
SL-D05 Viscose Blend 30–100 gsm TT Parallel-Laid / Semi-Cross-Laid Dyed / Printed Custom coloured or branded wipe substrates

Available Production Parameters

Parameter TT Parallel-Laid Line Semi-Cross-Laid Lines
Basis Weight 30–100 g/m² 40–120 g/m²
Maximum Fabric Width Up to 320 cm, custom slitting available Up to 320 cm
Standard Roll Length 500–2000 m per roll 500–1800 m per roll
Core Diameter 76 mm (3 inch) 76 mm (3 inch)
Max Roll Outer Diameter 120 cm 110 cm
Fabric Thickness 0.12–0.35 mm 0.15–0.40 mm

Two Spunlace Web Structures

We run one TT parallel-laid production line and two semi-cross-laid production lines, delivering two distinct web architectures tailored for wipe converting.

TT Parallel-Laid Spunlace Nonwoven

Our ANDRITZ TT parallel-laid equipment arranges fibres along the machine direction. It delivers a balanced MD/CD strength ratio, superior web uniformity and stable running performance for high-speed wet wipe converting. This grade is widely adopted for smooth, plain medical and healthcare wipe substrates.

Semi-Cross-Laid Spunlace Nonwoven

Our two semi-cross-laid lines focus on embossed dry and wet wipe substrates. The semi-cross fibre orientation improves cross-direction tensile strength. It supports pearl, dot and custom embossed textures, offering enhanced scrubbing performance for finished wipes.

How to Select the Right Spunlace Fabric for Your Wipe Production

Buyer Requirement Suggested Grade Core Selection Consideration
Pure viscose soft substrate SL-V01 Balanced absorbency, low lint, suitable for skin-contact wipes
High wet-strength blended substrate SL-VP02 Improved wet tensile strength, compatible with alcohol-based lotion
FSC-certified sustainable material SL-FSC03 Valid FSC transfer documents available for audit and customs clearance
Plastic-free substrate SL-C04 100% cellulosic composition; biodegradation claims require third-party certification
Textured embossed wipe substrate SL-VP02 / SL-C04 Pattern selection, embossing depth, converting trial strongly recommended

Fabric Selection Workflow

  1. Define your wipe application: Patient care / general healthcare / hard surface cleaning
  2. Confirm fibre composition: Viscose / polyester-viscose blend / 100% cellulosic
  3. Lock GSM and web structure: Target basis weight, parallel-laid or semi-cross-laid
  4. Evaluate critical performance: Wet strength, absorbency, linting and converting compatibility
  5. Complete lab & machine trial before bulk order confirmation

Technical Performance & Test Methods

Data below are typical average values for reference, tested on SL-V01 & SL-VP02 under standard laboratory conditions (23℃, 50% RH). Formal batch COA with actual test results will be issued upon shipment.

Test Item Test Standard Typical Value
MD Dry Tensile Strength GB/T 24218.3 60–105 N/5cm
CD Dry Tensile Strength GB/T 24218.3 45–80 N/5cm
MD Wet Tensile Strength GB/T 24218.3 35–70 N/5cm
CD Wet Tensile Strength GB/T 24218.3 28–60 N/5cm
Absorbency GB/T 24218.1 550–700 %
Liquid Retention Internal standard test 4.5–7.0 g/g
Linting Performance Internal lint shedding test Low lint, no loose fibre shedding

Quality Assurance

We implement full-lot traceable quality control across raw material intake, on-line production and finished roll inspection.

  • Raw material incoming check: Fibre purity, moisture content and visual inspection
  • Continuous on-line monitoring: Basis weight, fabric width, thickness and web uniformity
  • Finished roll inspection: Dry & wet tensile strength, defect screening, lint test, roll weight verification
  • Quality tolerance: Basis weight ±2 gsm; fabric width ±3 mm
  • Batch documentation: COA and test records available for audit
  • Traceability: Every batch is marked with unique batch number; retention samples stored for 6 months

Sustainable FSC & 100% Cellulosic Materials

FSC-Certified Viscose Spunlace (SL-FSC03)

We supply FSC-certified viscose spunlace fabric. Valid FSC transfer documents are provided for customer audit and customs clearance. Certification covers FSC viscose fibre and finished fabric.

100% Cellulosic Spunlace (SL-C04)

Plastic-free substrate made from wood pulp and regenerated cellulose.

Customization Capabilities

Custom Item Details
Slitting Custom width slitting, min width negotiable; 2–3% trim loss, net weight marked on each roll
Embossing Available patterns: pearl, dot; new patterns require roller cost & minimum trial order
Dyeing Colour match by Pantone or sample, shade variation within industry tolerance
Printing Custom printing supported, artwork review and MOQ required

Pre-production Spec Confirmation

All specs confirmed in writing: fibre blend, GSM, width, roll length, max OD, core size, surface finish and tolerances to avoid specification deviation.

Packaging & Shipment Information

  • Inner packing: PE moisture-proof film to prevent damp contamination
  • Outer packing: Hard cardboard edge protector + stretch film wrapping
  • Pallet packing: Wooden palletised, secured and wrapped for sea freight
  • Single roll weight: 200–500 kg, adjustable on request
  • Container loading reference:
  • 20GP: ~18–22 tons
  • 40GP: ~38–45 tons

MOQ, Sampling Policy & Order Process

MOQ & Sampling

  • Standard MOQ: 1 metric ton, subject to selected fabric specification
  • Sample policy: Free fabric samples
  • Courier cost: Buyer bears international freight for samples

Order Process

  1. Submit your requirements: Application, fibre blend, GSM, width, roll specs and estimated quantity
  2. Our technical team confirms feasibility and suitable grade
  3. Arrange free samples for lab testing and converting trial
  4. Issue formal quotation and lock specifications in writing
  5. Start mass production after deposit received
  6. Inspection, packing and shipment as agreed
QQ20250925132645
QQ20250925132641
QQ20250925132637
QQ20250925132632

FAQ

Q: What are your standard payment terms?

A: Standard terms: 30% T/T deposit before production, balance against copy of bill of lading. Irrevocable sight L/C is acceptable for long-term verified buyers.

Q: What is your production lead time?

A: Standard regular specs: 10–15 working days after deposit receipt. Custom embossed, dyed or printed fabrics: 18–25 working days. Lead time will be reconfirmed before order confirmation in peak season.

Q: Can you arrange third-party pre-shipment inspection?

A: Yes, SGS, BV, Intertek or other buyer-appointed inspection is supported. Inspection scope, sampling rules and test items shall be agreed before production.

Q: What is the shelf life of spunlace rolls under proper storage?

A: 12 months from production date when stored in cool, dry, ventilated warehouse away from sunlight and moisture. Keep pallet packs sealed after opening outer wrapping.

Q: What shipping documents will you provide?

A: Commercial invoice, packing list, bill of lading, batch COA and certificate of origin. FSC transfer documents are supplied for FSC-grade orders.

Q: How do you handle quality non-conformity after delivery?

A: Notify us within 7 working days upon defect discovery, with roll number, photos and supporting test data. Remedies including replacement, rework, credit note or partial refund will be discussed based on contract specs and evidence.

Q: Can you accept small trial batches outside the standard 1 MT MOQ?

A: Small trial runs are available for new blends, new emboss patterns or new formulations. Pricing and lead time will be adjusted accordingly.

Hot Tags: medical wet wipes, China medical wet wipes manufacturers, suppliers, factory, Alcohol Wipes for Injections, First Aid Alcohol Wipes, Hospital Wet Wipes, Medical Alcohol Wipes, Medical Wet Wipes, Sterile Wipes for Wounds

Send Message