Wet Wipes
Wet Wipes Nonwoven Fabric Manufacturer for Wet Wipes & Dry Wipes Production Solutions
We manufacture spunlace nonwoven substrates dedicated to wiping applications for wet wipes and dry wipes producers. Our production fleet includes two semi-cross-laid lines built for embossed wipe substrates, plus one TT direct-laid spunlace production line with maximum working width up to 320 cm.
Total annual capacity reaches 25,000 tons. We serve wet wipe converters, dry wipe manufacturers, nonwoven importers and distributors globally.
We offer three core material grades for wipe converting:
Embossed Spunlace for Wet Wipes
Produced on our semi-cross-laid lines, this patterned substrate is designed for finished wet wipes. Available patterns: Pearl, mesh, dot, honeycomb. Fiber blend, GSM and emboss pattern adjustable.
Widely used for personal care wipes, household cleansing wipes. For inquiry, please specify emboss design, target GSM, fiber composition and required roll width. GSM range: 40–120 gsm
Embossed Spunlace for Dry Wipes
Also manufactured on semi-cross-laid lines, tailored for disposable dry cleansing wipes, facial towels and beauty dry wipes. Pattern texture, fiber formula and GSM can be adjusted subject to feasibility. GSM range: 40–100 gsm
TT Direct-Laid Spunlace
Manufactured on our TT straight-laid spunlace line for wipe substrates requiring uniform web formation. Suitable for heavy-duty cleaning wipe base materials. Max working width 320 cm. GSM range: 30–100 gsm

Manufacturing Processes
Semi-Cross-Laid Spunlace
2 production lines specialized in embossed spunlace for wet wipes and dry facial towels. Supported emboss: pearl, mesh, honeycomb. Fiber blend, GSM and emboss pattern are fixed once grade approved for mass production.
TT Direct-Laid Spunlace
1 TT direct-laid spunlace line, max working width 320 cm. More uniform web structure, ideal for heavy-duty cleaning wipes. We verify runnability on your converting machine before order release.
All lines: ANDRITZ spunlace units for tight batch-to-batch consistency. Factory size: 30,000 ㎡+.
Available Material Specifications
|
Specification |
Available Range / Options |
|
Fiber Composition |
100% Viscose / 100% Polyester / Viscose-Polyester blends (30/70 ~ 70/30);Bamboo fiber blend available on request |
|
Basis Weight (GSM) |
30–120 gsm, tolerance ±5% |
|
Thickness |
0.20–1.2 mm (depends on GSM & pattern) |
|
Surface Structure |
Plain / Pearl / Mesh / Dot / Honeycomb |
|
Material Width |
100 mm – 3200 mm, slitting available |
|
MD / CD Tensile Strength |
Aligned with FZ/T 64012; standard 45gsm 50/50 viscose/polyester: MD≥100 N/5cm, CD≥40 N/5cm |
|
Wet Tensile Strength |
≥50% of dry tensile strength (standard wipe grade) |
|
Max Roll Outer Diameter |
1000 mm |
|
Core Diameter |
76 mm (3 inch standard); 152 mm (6 inch optional) |
|
Roll Length / Roll Weight |
500–3000 m per roll; 200–800 kg per jumbo roll |
Material Selection Guide for Wipes Converting
|
Parameter |
Key trade-offs you need to decide |
Information to provide |
|
Fiber Composition |
Balance absorption, softness, wet strength, compostability and cost |
Fiber type & blend ratio: viscose / PET / viscose-PET blend |
|
Basis Weight (GSM) |
Lower GSM cuts cost; higher GSM delivers better bulk and scrubbing power |
Target GSM + acceptable tolerance |
|
Thickness |
Thicker material for premium handfeel; thinner material for compact packaging |
Target thickness + agreed test standard |
|
Tensile Strength |
Higher tensile strength recommended for high-speed slitting & folding lines |
Required MD / CD dry tensile values |
|
Wet Strength |
Higher wet strength for heavy-duty wipes or wipes with high lotion loading |
Required wet tensile + test method |
|
Absorption Performance |
Fast absorption for personal care; high liquid holding capacity for heavy cleaning |
Target absorption capacity (benchmark ≥600% for viscose-rich grades) |
|
Surface Structure |
Pearl / mesh texture for scrubbing; plain for gentle skin contact |
Plain or specified emboss pattern |
|
Roll Specs |
Match your unwinder to minimize downtime and trim waste |
Roll width, core ID, max OD, roll length |
Fiber & Grade Selection Reference
Personal care / facial wipes (gentle grade):
Prioritize high viscose ratio for soft touch and fast absorption. Semi-cross-laid embossed spunlace is recommended.
General household cleaning wipes:
Viscose/PET blend (50/50 or 70/30). Balanced softness, wet strength and cost performance.
Industrial / automotive heavy-duty wipes:
Higher PET content or TT direct-laid spunlace. More uniform web and better wet integrity.
Compostable & sustainable wipes:
100% viscose or bamboo fiber blend, subject to technical review.
Please state your end use and fiber blend ratio on RFQ, so we can recommend the most suitable grade and avoid repeated sampling.

Product Inspection Checklist
We inspect key properties before shipment:
- Basis weight and tolerance
- Web thickness and cross-web uniformity
- MD & CD dry tensile strength
- Wet tensile strength
- Absorption performance
- Roll width tolerance, edge condition and winding quality
- Batch consistency
Specification Confirmation
All acceptance criteria, test methods and tolerance limits shall be mutually agreed and documented before order confirmation. We follow FZ/T 64012 and GB/T 24218 series nonwoven test standards for wipe substrates. Every material grade has its own agreed inspection standard.
Batch Documentation
Subject to prior agreement, we can provide supporting documents including TDS, batch inspection reports and COA where applicable. Batch traceability records are maintained for our production lots.
Roll Dimensions & Converting Compatibility
Substrate performance alone is not sufficient; roll configuration must match your unwinding and slitting equipment.
|
Roll Parameter |
Impact on your production |
|
Roll Width |
Must match working width of your slitter or wipe converting machine |
|
Outer Diameter |
Restricted by your unwind stand clearance, max 1000 mm |
|
Core Diameter |
Standard 76 mm (3”), optional 152 mm (6”) |
|
Roll Length |
Determines line changeover frequency, adjustable 500–3000 m |
|
Roll Weight |
200–800 kg per jumbo roll, for forklift handling, palletization and logistics planning |
|
Winding Tension |
Controlled to avoid web stretching or slack during processing |
Available roll sizes, slitting options and export packaging will be confirmed against your equipment requirements. Standard export packing: PE film wrapped + palletized.
Applications
Wet Wipes:
Personal care wipes, household cleansing wipes
Dry Wipes:
Facial towels, beauty dry wipes, disposable cleansing dry wipes
Heavy-duty wipe substrates:
Industrial and automotive cleaning base material
This is our standard qualification process for new converters and distributors:
Submit full specification: Share application, fiber blend, target GSM, width, surface pattern, strength targets and roll requirements.
Feasibility review: Our engineering team assesses whether the requested grade can be produced on our semi-cross-laid or TT direct-laid line.
Sample & technical review: We confirm sample availability. You run trials on your converting machine and test finished wipe performance. Standard sample size: 1–3 m per width. Sample cost and freight at buyer’s cost.
Lock specification and TDS: If sample passes your trial, both parties finalize the TDS, test standards and acceptance limits to guarantee sample-to-bulk consistency.
Bulk order confirmation: Confirm MOQ, roll layout, packaging, lead time and payment terms before bulk release.

Manufacturing & Supplier Qualification Information

Manufacturing entity: Hangzhou Shunlong Nonwoven Technology Co., Ltd.
Production location: Hangzhou, Zhejiang, China
Production assets: 3 ANDRITZ spunlace lines (2 semi-cross-laid, 1 TT direct-laid), 30,000 ㎡ factory
Quality management: ISO9001:2015 (GB/T19001-2016) quality system
Available documents upon request: TDS, batch inspection report, COA (per agreed grade)



We support long-term bulk sourcing for wipe converters, brand owners and nonwoven distributors. For repeat orders, we fix a formal material specification covering fiber ratio, GSM, web structure, roll dimensions and quality acceptance rules. Commercial terms:
MOQ: 1000 KG per grade
Order unit: Kilogram
Lead time: 7–12 working days after deposit received
Payment terms:
T/T, 30% deposit, balance before shipment
Incoterms:
EXW / FOB Ningbo / CIF available
Packaging:
PE wrapped jumbo rolls on export pallet Sample policy: sample charge applicable, freight collect. Sample cost can be refunded when bulk order reaches agreed volume.
Frequently Asked Questions
We are one of the most experienced wet wipes manufacturers and suppliers in China, also support custom service. Please feel free to wholesale advanced wet wipes made in China here from our factory. Quality products and reasonable price are available.
