Industrial & Automotive Wet Wipes
Industrial & Automotive Wet Wipes Manufacturer for Professional Cleaning & Auto Care Solutions
We supply industrial cleaning and automotive wet wipes to professional buyers, including cleaning brands, importers, wholesalers and distributors.
Our portfolio covers heavy-duty industrial wipes for oil, grease, resin and adhesive residue removal, plus automotive wipes formulated for interior trim, dashboard and leather seat care.
We offer flexible options for substrate, dimension, cleaning formulation and packaging. Share your application and purchasing targets, and we will configure a suitable solution for your project.
Product Supply Scope
Financial Big Data
Our in-house spunlace nonwoven workshop has been running since 2018 with ANDRITZ production lines, delivering consistent base fabric rolls under our own quality control.
Retail Big Data
While converting, liquid impregnation and final packaging are handled by our long-term, pre-qualified manufacturing partners, we own the full quality gatekeeping process.
Industrial Big Data
All raw fabric inspection, formula compatibility validation, finished product audit and delivery schedule are managed directly by SunLuner.
Product Categories
Built for heavy-duty workshop decontamination, these wipes reliably cut through oil, grease, resin and cured adhesive residue. We support full customisation of substrate, emboss pattern, cleaning chemistry and packaging. Specs can be tuned to suit your cleaning task and sensitive contact surfaces.
Available material & packaging options: Spunlace, PP melt-blown, thermal-bonded, hydrophilic spunbond; plain / pearl embossed surface; scented or unscented; pouch, box and bucket formats.
Multi-purpose wipes for routine maintenance of automotive interior trims. Matching the substrate and formula to your target surface prevents streaks, haze and surface etching. We offer custom dimensions, fragrance and private-label packaging for auto care brands.
Optimised for hard plastic dashboards and rigid interior trims. Gloss and matte coatings require separate cleaning formulations. Please specify matte or glossy finish when enquiring for precise formulation matching.
Formulated to clean and gently condition automotive leather upholstery. Leather types vary significantly — aniline, pigmented and coated leathers respond differently to cleaning agents. Pre-production compatibility testing is mandatory to avoid discoloration and premature drying.
Product Range and Application Guide
|
Product Category |
Short Use |
Key Points to Confirm During Inquiry |
|
Industrial Cleaning Wet Wipes |
Workshop heavy-duty cleaning |
Substrate, liquid formula, wipe size, emboss, packaging, absorbency & wet strength |
|
Car Interior Cleaning Wipes |
Auto interior daily wipe |
Surface type, liquid pH, non-streak requirement, wipe dimension |
|
Car Dashboard Wipes |
Dashboard hard plastic care |
Coating type (mat/gloss), anti-haze requirement, solvent compatibility |
|
Leather Seat Wipes |
Leather clean & conditioning |
Leather finish (aniline / pigmented / coated), conditioner requirement, no discoloration test |
Specification Reference
Industrial Cleaning Wet Wipes
|
Specification Item |
Reference Options & Ranges |
|
Substrate |
Spunlace / PP melt-blown / thermal-bonded / hydrophilic spunbond |
|
Fabric Weight (GSM) |
40–80 gsm (spunlace); 30–60 gsm (melt-blown / spunbond) |
|
Wipe Dimension |
15×20 cm, 18×20 cm, 20×20 cm, 20×30 cm |
|
Surface Texture |
Plain / pearl embossed |
|
Fragrance |
Scented / unscented |
|
Cleaning Liquid |
Water-based, alcohol-based, IPA-based; pH 5.5–9.0 |
|
Liquid Loading |
220%–320% by substrate weight |
|
Pack Format |
Pouch / box / bucket |
|
Pack Count |
10–120 pcs per pack, with or without flip lid |
|
Export Carton Configuration |
12 / 24 / 48 packs per carton |
Automotive Wet Wipes
|
Specification Item |
Reference Options & Ranges |
|
Substrate |
Spunlace (most common), hydrophilic spunbond |
|
Fabric Weight (GSM) |
40–70 gsm |
|
Wipe Dimension |
15×20 cm, 18×20 cm, custom sizes available |
|
Surface Texture |
Plain / pearl embossed |
|
Fragrance |
Scented / unscented |
|
Cleaning Liquid |
Water-based preferred; low-residue formula; pH 5.5–7.5 |
|
Pack Format |
Resealable pouch, plastic tub / bucket |
|
Pack Count |
10–80 pcs per pack |
Substrate and Liquid Selection Guidance
Heavy industrial grease & adhesive removal: Prioritise high wet tensile strength, textured emboss pattern and stable compatibility with degreasing agents.
Dashboard & interior plastic trim: Prioritise low-residue, streak-free formulas and non-scratch substrates safe for delicate plastic coatings.
Leather seat maintenance: Adopt mild, non-alkaline conditioning formulas validated against the exact leather finish to eliminate staining and cracking risks.
We evaluate these key parameters alongside you: Fiber composition, GSM, web structure, absorbency, wet strength, surface texture and chemical compatibility.
The same nonwoven substrate can yield vastly different results under varying liquid loading, pH and wiping pressure. Compatibility pre-sampling is highly recommended before bulk production.

We enforce a structured quality workflow covering substrate incoming check, compatibility review and finished goods audit.
Incoming substrate inspection: GSM, roll width, tensile strength and visual defect inspection for all spunlace rolls produced in our facility.
Liquid-substrate compatibility bench test: Verify no degradation, fiber shedding or discoloration before converting.
In-process monitoring: Wipe cutting accuracy, liquid pick-up consistency, emboss quality and pouch seal integrity.
Finished goods inspection: Pack count, leak test, visual audit and retention of batch samples.
Batch traceability: Each production batch carries a unique ID for quality follow-up. Batch samples are retained for 3 months for qualified orders.
Formal acceptance criteria are agreed per project. Additional third-party testing can be arranged at extra cost upon request.
Private Label & Customization Process
Private label is available for eligible products, subject to MOQ and artwork approval. Customizable items: Custom printed pouches, bucket labels, outer cartons, non-standard wipe sizes, pack quantities, substrate selection, fragrance and cleaning liquid adjustments (subject to compatibility testing).
Our private label development workflow:
Requirement review:
Confirm application, substrate, size, liquid formula and packaging type
Spec lock:
Align technical parameters, MOQ and commercial terms
Sample validation:
Test cleaning performance, surface compatibility and packaging seal
Artwork approval:
Confirm print files, labels and carton layout
Bulk production:
Deposit receipt + artwork sign-off before production kick-off
Final inspection & shipment:
Conduct agreed checks before dispatch
You may share draft artwork and target market compliance requirements for our feasibility review.
Technical Documentation
Documents Available for confirmed projects
Product specification sheet
Nonwoven substrate data sheet
SDS (Safety Data Sheet) for selected liquid formulations
Batch COA (Certificate of Analysis) for finished lots
Testing & documents arranged upon request
Third-party test reports (SGS / INTERTEK, scope customized per buyer requirement)
Custom packaging dimension drawings
Compliance documents for target markets
Please list your document requirements when sending an inquiry, and we will confirm feasibility and lead time.



Standard MOQ: 1 metric ton for industrial cleaning wet wipes. MOQ for automotive wipes and custom printed packaging will be reconfirmed after spec review. Custom packaging usually raises the applicable MOQ.
Sample policy: Free sample supply; customer covers courier freight. Sample availability needs confirmation for automotive and custom formulations.
Sample lead time: 3–5 working days after we receive your specification requirements.
Bulk production lead time: 20–28 working days after deposit receipt, artwork approval and full specification lock-in.
Repeat orders can be scheduled for shorter lead times where stock substrate is available.

How to Request a Bulk Quotation
To receive an accurate quotation, please share the following information as much as possible:
Product category and target cleaning application
Preferred substrate and fabric weight (if known)
Wipe size, texture and pack quantity
Cleaning liquid requirements, fragrance and pH preference
Packaging format: Pouch / box / bucket, with or without printing
Estimated order quantity
Destination country
Private label or compliance document requirements
If you have not finalized all specs, you may share your application scenario and target volume. Our team will propose suitable product configurations for you to evaluate.
Frequently Asked Questions
We are one of the most experienced industrial & automotive wet wipes manufacturers and suppliers in China, also support custom service. Please feel free to wholesale advanced industrial & automotive wet wipes made in China here from our factory. Quality products and reasonable price are available.
