SunLuner develops reliable raw material solutions for Biodegradable Hygiene Wipes, as well as general wet wipes, dry wipes, facial towels and personal care wipe products.
We partner with wipe converters, hygiene manufacturers, nonwoven importers and distributors, supplying carefully selected spunlace nonwoven substrates, including viscose, viscose/polyester blends, cellulose-based materials, alongside custom dyed and printed options.
For brands building eco-friendly wipe lines, our FSC-certified viscose and 100% cellulose plastic-free substrates are engineered to support sustainable wipe development.
Fiber Options to Tailor Your Wipes
Each fiber grade delivers different properties for your finished wipes:
- 100% Cellulose-Based Fabric: Plastic-free substrate formulated for zero-plastic wipe formulas. High absorbency and soft hand feel, ideal for eco wipe ranges.
- FSC-Certified Viscose: Traceable, responsibly sourced forest fiber. Balanced softness and absorbency for premium personal care wipes.
- Viscose/Polyester Blends: Reliable choice for everyday hygiene wipes. Polyester boosts wet tensile strength and dimensional stability; viscose provides good absorbency. Common ratios: 70/30, 50/50, 30/70.
- Dyed and Printed Fabrics: Custom colour, embossed or printed surface designs available. Natural white as standard stock; custom colours upon request.
Share your target wipe application and preferred fiber composition with our team, and we will match the most suitable substrate for your project, including solutions for Biodegradable Hygiene Wipes.
Spunlace Substrate Structures & Embossed Finishes
Our facility runs three France-imported ANDRITZ spunlace lines: two semi-cross-lapped lines and one TT parallel-laid line.
Semi-Cross-Lapped Spunlace Substrate
This embossed substrate is widely used for wet wipes, dry wipes and facial towels. It balances MD/CD tensile strength and resists deformation during wiping. Available emboss patterns: pearl, diamond, mesh, dot, custom embossing.
TT Parallel-Laid Spunlace Substrate
It features high machine-direction strength and uniform web formation, perfect for high-speed converting of lightweight, cost-effective hygiene wipes. Plain surface is standard; custom perforation is available on request.
Substrate selection depends on your finished wipe formula, fiber blend and converting machine setup. Send over your specifications so we can recommend the best structure.
Substrate Specifications
| Specification | Standard & Custom Range |
|---|---|
| Fiber Composition | 100% cellulose, 100% viscose, viscose/polyester blends (custom ratio) |
| Basis Weight (GSM) | 30–100 gsm; 40–70 gsm is regular stock for wipe substrates |
| Fabric Width | 1000–3200 mm jumbo roll; can be slit down to customer required width |
| Fabric Structure | Semi-cross-lapped / TT parallel-laid |
| Surface Finish | Plain, pearl, diamond, mesh, dot embossed, custom print |
| Roll Specification | Core 76 mm (3 inch); max roll diameter 1200 mm; PE film + pallet packing |
| Color | Natural white; custom dyed colours for MOQ order |
| Finishing | Hydrophilic treatment (standard for wipe substrates) |
Our Production Capability for Wipe Substrates
Hangzhou Shunlong Nonwoven Technology Co., Ltd. has specialized in ANDRITZ spunlace production since 2018.
- 2 × Semi-cross-lapped lines: Embossed substrates for wet & dry wipes, facial towels
- 1 × TT parallel-laid line: Uniform plain spunlace for high-speed wipe converting
- Total annual capacity: Approx. 10,000 tons of wipe-grade spunlace nonwoven rolls.
Quality Control and Technical Documentation
We implement multi-stage QC throughout the whole production cycle, tested under GB/T 24218 nonwoven test standards:
- Raw Material Inspection: Fiber batches are checked for composition, moisture and impurity before feeding into production.
- In-Process Monitoring: Web formation, hydroentangling pressure and drying temperature are tracked continuously.
- Finished Roll Inspection: GSM tolerance, tensile strength, absorbency, surface defect and roll dimension checked before packing and shipment.
For supplier audit and finished wipe approval, we can provide supporting documents subject to material grade:
- Technical Data Sheet (TDS)
- Fiber composition declaration
- Batch inspection report
- Valid certification documents: FSC-CoC, ISO9001, SGS, OekoTex 100 upon qualified grade
Please state your document requirements when submitting your inquiry.
Wholesale Orders and Sample Requests
Typical MOQ for regular spunlace jumbo rolls is 1 MT. Custom embossed, printed, dyed or special cellulose grades require 2 MT minimum order. Material samples are free of charge; international courier freight is on the buyer's side. Sample lead time: 2–3 working days.
Standard lead time for confirmed bulk order: 7–15 working days based on specs and order volume.
To receive an accurate quotation, kindly provide:
- Fiber composition & blend ratio
- Target GSM
- Required roll width
- Preferred web structure (semi-cross / parallel-laid)
- Emboss pattern if needed
- Estimated order volume
- Destination country & trade term




Frequently Asked Questions
Can you support third-party lab testing for our target market's compliance standard?
Yes. We accept third-party sampling and testing arranged by your side. We can cooperate with SGS, Intertek, BV and other accredited labs. Just advise the required test items and standards in advance.
What payment terms do you accept?
Our standard term is T/T, 30% deposit before production and 70% balance against copy of bill of lading. L/C is negotiable for large-volume orders.
Can you arrange consolidation with other goods in one container?
Yes. We support container consolidation if you purchase other materials from local suppliers. Please confirm loading schedule and warehouse address beforehand.
Can you mark custom labels on jumbo rolls and pallets?
Absolutely. We can print your company name, PO number, batch code, specification and shipping mark on roll labels and pallet marks for traceability.
How do you handle defective goods if quality issue comes out after arrival?
We review test records and customer photos/videos first. If confirmed as our production defect, we negotiate solutions including re-production, partial credit or compensation, based on actual loss.
Do you keep stock for regular specifications for quick replenishment?
We maintain safety stock for popular 40–60gsm white viscose and viscose/polyester blends. Stock availability is subject to real-time inventory, please check with sales.
Are you able to provide pre-shipment inspection (PSI) service?
Yes. We support self-inspection report before shipment, and welcome your own inspector or appointed third-party inspector to visit our factory for pre-shipment inspection.

